The importance of frequency tracking of ultrasonic power supply: it is a long-term puzzle for the application of ultrasonic processing technology. Without frequency tracking, the transducer will not work continuously and normally. Because of the change of the working conditions, the resonant frequency of the transducer often changes, which makes the vibration of the system detuning and amplitude reduced. At the same time, when the transducer works in the detuning state, the temperature of the acoustic system will increase and the amplitude will decrease exponentially, resulting in a vicious cycle, which not only affects the processing speed, but also affects the processing quality, shortens the service life of the ultrasonic generator, and even causes the transducer to burn out due to overheating.
Type |
Power(W) |
Frequency (KHz) |
Transducer numbers |
Size |
AC110V60HZ+/-10% USA /LATIN AMERICA STANDARD ARE AVAILABLE |
||||
UCE-NT300 |
300W |
20khz,25khz,28khz,33khz,40khz |
3-6 |
300x360x150 |
UCE-NT600 |
600W |
20khz,25khz,28khz,33khz,40khz |
6-12 |
300x360x150 |
UCE-NT900 |
900W |
20khz,25khz,28khz,33khz,40khz |
9-18 |
300x360x150 |
UCE-NT1000 |
1000W |
20khz,25khz,28khz,33khz,40khz |
10-20 |
300x360x150 |
UCE-NT1200 |
1200W |
20khz,25khz,28khz,33khz,40khz |
12-24 |
300x360x150 |
UCE-NT1500 |
1500W |
20khz,25khz,28khz,33khz,40khz |
15-30 |
300x360x150 |
UCE-NT1800 |
1800W |
20khz,25khz,28khz,33khz,40khz |
18-36 |
300x360x150 |
UCE-NT2000 |
2000W |
20khz,25khz,28khz,33khz,40khz |
20-40 |
300x360x150 |
UCE-NT2400 |
2400W |
20khz,25khz,28khz,33khz,40khz |
24-48 |
300x360x150 |
UCE-NT3000 |
3000W |
20khz,25khz,28khz,33khz,40khz |
50-60 |
300x360x150 |
High Frequency |
300W-1200W |
65-80khz |
||
High Frequency |
300W-1200W |
120-135khz |
Ultrasonic cleaning Drivers Generator Box 28khz/40khz